How to Maintain Your Rear Seat Belt and Retractor on 2008 Dodge Sprinter 3500?

Inspect all rear seat belts, buckles, mounting pieces, retractors, tether straps and their anchors for proper installation and correct operation and replace cut, torn or damaged belts, straighten twisted ones, tighten loose fasteners and change any defective or broken buckles, retractors, latch plates or anchor plates. Pull out the rear passenger bench seat with the seat belt and retractor and remove the back seat shield. Release the seat belt buckle found on the right outboard edge of the rear seat. For this position, unfasten and remove the cap from the screw at the left end of the seat cushion base, then remove those screws and both lower anchors with their two washers and spacer. Pull up on the webbing of each rear seat belt to reveal the plastic push pin fastener, unplug it and lift out the turning loop trim covers and seat belts from the top of the seat back. Following this, take off the plasticky molding on the sides of the seat back, along with the padding and then the seat back cover. Cut away the push nut from the pivot pin in the back of the rear seat back frame loop bracket, then pull the pin, turn the two loops and remove the both bushings from the bracket. Weave the belt latch plate, the lower anchor and the webbing through the two turning loops and the turning loop bracket at the top of the seat back frame. After that, remove the screw holding the rear seat belt retractor to the bracket on the rear side of the seat cushion. Lift the belt and retractor together out of the bracket.

OEM 2008 Dodge Sprinter 3500 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Seat Belts found

View related parts
2008 Dodge Sprinter 3500 Outer Buckle Part Number: 5124982AA
$32.91 MSRP: $44.90
You Save: $11.99 (27%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half; Buckle; Latch; Seat Belt Buckle Half
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.3 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5124982AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Center Part Number: 1HF08DX8AA
$45.51 MSRP: $261.00
You Save: $215.49 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seatbelt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Center; Center Seat Belt; Seat Belt Front Outer
- Position: Front Center
- Replaces: 1HF08DX9AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.3 x 4.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HF08DX8AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Outer Part Number: 1HG34DX9AA
$49.97 MSRP: $287.00
You Save: $237.03 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Assembly - Front Outer; Seat Belt Lap and Shoulder Belt, Front Outer; Belt & Retractor; Seat Belt Front Outer
- Position: Front Outer
- Item Weight: 3.50 Pounds
- Item Dimensions: 10.2 x 7.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HG34DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Latch Part Number: 1HE56DX9AA
$81.41 MSRP: $121.00
You Save: $39.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half
- Replaced by: 1HE56DX9AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.7 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HE56DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Outer Buckle Part Number: 1HE56DX9AB
$81.41 MSRP: $121.00
You Save: $39.59 (33%)
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Buckle Half
- Replaces: 1HE56DX9AA, 68010832AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.7 x 2.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HE56DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Center Buckle, Rear Part Number: 1LK95DX9AA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center, Rear; Buckle; Latch; Seat Belt Buckle Half
- Position: Rear
- Replaces: 5104502AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.4 x 4.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1LK95DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Lap & Shoulder Belt Part Number: 1HD71DX9AA
Product Specifications
- Other Name: Belt Assembly - Front Outer; Seat Belt Front Outer Dual Passenger Seat; Seat Belt Front Outer
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.6 x 7.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HD71DX9AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Outer Buckle Part Number: 68010831AA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Latch; Seat Belt Buckle Half
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.8 x 4.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68010831AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Lap & Shoulder Belt, Front Outer Part Number: 1HQ42DX9AB
Product Specifications
- Other Name: Belt Assembly - Front Outer; Seat Belt Lap and Shoulder Belt, Front Outer; Belt & Retractor
- Position: Front Outer
- Replaces: 1HQ42DX9AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 7.6 x 7.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1HQ42DX9AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.0L V6, 3.5L V6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Seat Belt Parts and Q&A

Q: How to Maintain Your Rear Seat Belt and Retractor on 2008 Dodge Sprinter 3500?
A: Inspect all rear seat belts, buckles, mounting pieces, retractors, tether straps and their anchors for proper installation and correct operation and replace cut, torn or damaged belts, straighten twisted ones, tighten loose fasteners and change any defective or broken buckles, retractors, latch plates or anchor plates. Pull out the rear passenger bench seat with the seat belt and retractor and remove the back seat shield. Release the seat belt buckle found on the right outboard edge of the rear seat. For this position, unfasten and remove the cap from the screw at the left end of the seat cushion base, then remove those screws and both lower anchors with their two washers and spacer. Pull up on the webbing of each rear seat belt to reveal the plastic push pin fastener, unplug it and lift out the turning loop trim covers and seat belts from the top of the seat back. Following this, take off the plasticky molding on the sides of the seat back, along with the padding and then the seat back cover. Cut away the push nut from the pivot pin in the back of the rear seat back frame loop bracket, then pull the pin, turn the two loops and remove the both bushings from the bracket. Weave the belt latch plate, the lower anchor and the webbing through the two turning loops and the turning loop bracket at the top of the seat back frame. After that, remove the screw holding the rear seat belt retractor to the bracket on the rear side of the seat cushion. Lift the belt and retractor together out of the bracket.