JeepParts
My Garage
My Account
Cart
OEM 2007 Jeep Commander Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Catalytic Converters found
2007 Jeep Commander Catalytic Converter Part Number: 52124305AC
Product Specifications- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust To Manifold
- Replaces: 52124305AB, 52124305AA
- Item Weight: 29.20 Pounds
- Item Dimensions: 39.1 x 27.0 x 16.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52124305AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Catalytic Converter Part Number: 52124165AA
Product Specifications- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust To Manifold
- Replaces: 52090045AE
- Item Weight: 10.30 Pounds
- Item Dimensions: 45.9 x 18.2 x 29.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52124165AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Catalytic Converter Part Number: 52090043AF
Product Specifications- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust To Manifold
- Replaces: 52090043AE, 52090043AD
- Item Weight: 29.70 Pounds
- Item Dimensions: 39.9 x 27.3 x 16.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090043AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Catalytic Converter Parts and Q&A
- Q: How to Remove and Replace a Catalytic Converter on a 3.7L Engine on 2007 Jeep Commander?A: Start by putting the steady rest bracket on the front exhaust pipe and the catalytic converter assembly. Following this, put in the front exhaust pipe/catalytic converter assembly into the car. At the front exhaust pipe/catalytic converter assembly, bolt and nut the assembly to the exhaust manifold flange, but do not tighten them yet. Repeat this step for the nuts connecting the assembly to the muffler flange. The clearance for the exhaust pipe should be at least 25.4 mm (1.0 in.) above any parts along the frame or near the vehicle floor. Tighten the front exhaust pipe/catalytic converter assembly to exhaust manifold bolts to 26 Nm (19 ft. lbs.) and tighten the front exhaust pipe and catalytic converter assembly to muffler flange nuts to 47 Nm (35 ft. lbs.). Attach the steady rest bracket bolts and tighten them up to 47 Nm (35 ft. lbs.). Plug in both ends of the oxygen sensor wiring, mount the transmission crossmember, lower the vehicle and lastly start the engine to look for leaks, fixing them as they are found.
Related 2007 Jeep Commander Parts
2007 Jeep Commander Muffler
2007 Jeep Commander PCV Valve
2007 Jeep Commander Canister Purge Valve
2007 Jeep Commander EGR Tube
2007 Jeep Commander EGR Tube Gaskets
2007 Jeep Commander EGR Valve Gasket
2007 Jeep Commander Exhaust Hanger
2007 Jeep Commander Exhaust Heat Shield
2007 Jeep Commander Exhaust Manifold Gasket
2007 Jeep Commander Exhaust Pipe
2007 Jeep Commander Tail Pipe
2007 Jeep Commander Vapor Canister