JeepParts
My Garage
My Account
Cart
OEM 2007 Jeep Commander Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Intake Manifolds found
2007 Jeep Commander Intake Manifold Part Number: 53032774AA
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes 1, 3, 4, 5, 6, 12; Manifold Intake
- Item Weight: 13.40 Pounds
- Item Dimensions: 22.2 x 15.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Intake Manifold Part Number: 53032999AD
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes Items 2, 3, 4, 5, 6, 7; Manifold Intake
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 17.0 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032999AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Intake Manifold Part Number: 4591846BA
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Parts Listed Below; Manifold Intake
- Replaces: 4591846AK
- Item Weight: 23.40 Pounds
- Item Dimensions: 29.2 x 20.1 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591846BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Intake Manifold Parts and Q&A
- Q: How to Remove the Intake Manifold on 2007 Jeep Commander?A: It is important to follow the Fuel System Pressure Release, remove the negative cable from the battery and then remove the intake manifold. After that, take the resonator assembly and air inlet hose off and unplug the electrical connector for the Manifold Absolute Pressure (MAP) Sensor (2). Detach both the vapor purge hose, the brake booster hose and the positive crankcase ventilation (PCV) hose. Take out the generator and the air conditioning compressor, next disconnect the ETC connector from the throttle body (3) and remove the ignition coil towers. After removing the top oil dipstick tube retaining bolt, also remove the EGR tube (1), the fuel rail and the throttle body assembly (1). Remove the coolant from the cooling system when its temperature is below the mark and use the engine support fixture (1) with tool #8534 at the back of the engine. After removing the right side engine mount to frame bolt (3), drop the engine until it rests in the frame mount. After that, take out the intake manifold retaining bolts in reverse order and remove the intake manifold.
Related 2007 Jeep Commander Parts
2007 Jeep Commander Air Filter
2007 Jeep Commander Fuel Tank
2007 Jeep Commander Throttle Body
2007 Jeep Commander Air Duct
2007 Jeep Commander Air Filter Box
2007 Jeep Commander Air Intake Coupling
2007 Jeep Commander Cruise Control Switch
2007 Jeep Commander Fuel Pump Gasket
2007 Jeep Commander Fuel Pump Seal
2007 Jeep Commander Fuel Rail
2007 Jeep Commander Intake Manifold Gasket
2007 Jeep Commander Throttle Body Gasket