How to Install an Intake Manifold on Jeep Commander?

First, lay the intake manifold gaskets onto the manifold and then put the intake manifold into place. Place and tighten the retaining bolts for the intake manifold according to the correct sequence with a force of 12 Nm (105 in. lbs.) After that, fit the fuel rail and the EGR tube and then place the top oil dipstick tube retaining bolt. It's important to tighten the throttle body correctly so it doesn't get damaged; install the throttle body-to-manifold O-ring and secure it to the intake manifold using the four 7 Nm bolts. Install the ignition coil towers and link the electrical links that connect the Manifold Absolute Pressure (MAP) Sensor, Coolant Temperature (CTS) Sensor and ignition coil towers. Once everything else is complete, put in the generator and the air conditioning compressor and tie on the Vapor purge, Brake booster and PCV hoses. Plug the ETC connector into the throttle body, top up the cooling system and use support fixture #8534 to raise the engine. Secure the engine mount to frame bolt with the right side engine mount, then take out the engine support fixture. Next, put in the resonator assembly and air inlet hose and then rejoin the negative cable to the battery.

How to Remove an Intake Manifold on Jeep Commander?

You should perform the Fuel System Pressure Release procedure before you remove the intake manifold. Disconnect the negative cable from the battery, undo all clamps attaching the resonator assembly and take out the air inlet hose. Remove electrical connections from the Manifold Absolute Pressure (MAP) Sensor (2), vapor purge hose, brake booster hose and positive crankcase ventilation (PCV) hose. After that, take out the generator using part number 8534 and then remove the air conditioning compressor as well. Unplug the ETC connector off the throttle body (3) and remove the ignition coil towers as well. Pull out the bolt at the top of the oil dipstick tube, then remove the EGR tube (1), fuel rail and throttle body assembly (1). Drain off fluid below the level recommended by the coolant temperature and place the engine support fixture (1) under the engine. Unscrew the right side engine mount to frame bolt (3) and bring the engine down so that its mount fits inside the frame mount. To finish, take off the retaining fasteners on the intake manifold in the reverse order you loosened them.

OEM Jeep Commander Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Intake Manifolds found

View related parts
Jeep Commander Intake Manifold Part Number: 53034229AA
$758.03 MSRP: $1160.00
You Save: $401.97 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Engine Intake; Engine Intake Manifold; Manifold Engine Intake
- Replaces: 53032761AG, 53032761AJ, 53032761AH, 53032761AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Jeep Commander | Limited, Sport | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 53034181AD
$419.90 MSRP: $637.00
You Save: $217.10 (35%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Engine Intake
- Replaces: 53034181AB, 53034181AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 68048131AC
$367.55 MSRP: $537.00
You Save: $169.45 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048131AA, 68048131AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 53032774AA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes 1, 3, 4, 5, 6, 12; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 53032999AD
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes Items 2, 3, 4, 5, 6, 7; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Base, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 53032795AC
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 53032803AB, 53032803AA, 53032795AB, 53032795AA, 53032803AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 4591846BA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Parts Listed Below; Manifold Intake
- Replaces: 4591846AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Commander | Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Intake Manifold Part Number: 4591846AJ
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 4591846AE, 4591846AG, 4591846AH, 4591846AF, 4591846AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | Limited | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander Intake Manifold

Choose OEM Intake Manifold that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Intake Manifold is one of the major parts that help boost the performance and efficiency of Jeep Commander vehicles. This intake manifold is intended to supply the accurate air or mixture of air and fuel to every cylinder head intake port in order to maximize the output of the engine. For the different Commander variants, these include the XK and the 2022 Meridian, Jeep Commander Intake Manifold is designed with different configurations for specific types of engine power that may comprise of V6 and V8 types. Its modern design frequently uses a lightweight composite plastic material; this though, does not only minimize the overall automobile weight but also enhances its heat emission capability in contrast to conventional automobile materials. There are many special features of the Jeep Commander Intake Manifold among which is the variable length intake manifold or VLIM which; is a system used to change the physical length of the intake manifold to suit the needs of the engine in relation to load for better combustion efficiency and reduction of knock. Engaging creative design provides better fuel economy and performance too along with safety hence the Jeep Commander is described as reliable vehicle for drivers. Moreover, other additional features of real time monitoring of temperature and airflow of the Jeep Commander Intake Manifold take the use facsimile to another level in guaranteeing the enhanced performance of the engine. So, preserving its status of the highly demanded and reliable product with many unique features, Jeep Commander Intake Manifold continues to be the significant factor in the development of the Jeep Commander as the mid-size SUV worthy of attention.

Jeep Commander Intake Manifold Parts and Q&A

Intake Manifold
4591846BA
Q: How to Install an Intake Manifold on Jeep Commander?
A:
First, lay the intake manifold gaskets onto the manifold and then put the intake manifold into place. Place and tighten the retaining bolts for the intake manifold according to the correct sequence with a force of 12 Nm (105 in. lbs.) After that, fit the Fuel Rail and the EGR tube and then place the top oil dipstick tube retaining bolt. It's important to tighten the Throttle Body correctly so it doesn't get damaged; install the throttle body-to-manifold O-ring and secure it to the intake manifold using the four 7 Nm bolts. Install the ignition coil towers and link the electrical links that connect the Manifold Absolute Pressure (MAP) Sensor, Coolant Temperature (CTS) Sensor and ignition coil towers. Once everything else is complete, put in the generator and the air conditioning compressor and tie on the Vapor purge, Brake booster and PCV hoses. Plug the ETC connector into the throttle body, top up the cooling system and use support fixture #8534 to raise the engine. Secure the engine mount to frame bolt with the right side engine mount, then take out the engine support fixture. Next, put in the resonator assembly and air inlet hose and then rejoin the negative cable to the battery.
Intake Manifold
53034229AA
Q: How to Remove an Intake Manifold on Jeep Commander?
A:
You should perform the Fuel System Pressure Release procedure before you remove the intake manifold. Disconnect the negative cable from the battery, undo all clamps attaching the resonator assembly and take out the air inlet hose. Remove electrical connections from the Manifold Absolute Pressure (MAP) Sensor (2), vapor purge hose, brake booster hose and positive crankcase ventilation (PCV) hose. After that, take out the generator using part number 8534 and then remove the air conditioning compressor as well. Unplug the ETC connector off the Throttle Body (3) and remove the ignition coil towers as well. Pull out the bolt at the top of the oil dipstick tube, then remove the EGR tube (1), Fuel Rail and throttle body assembly (1). Drain off fluid below the level recommended by the coolant temperature and place the engine support fixture (1) under the engine. Unscrew the right side Engine Mount to frame bolt (3) and bring the engine down so that its mount fits inside the frame mount. To finish, take off the retaining fasteners on the intake manifold in the reverse order you loosened them.