How to Install a Radiator Support on 2007 Jeep Commander?

First, install the upper crossmember and then submit the bolts found on the edge of the radiator crossmember. After that, fit the nuts to the crossmember support of the latch using an 11 Nm (8 ft. lbs.) torque. After that, fit the grille assembly and finally mount the hood seal. Check how well the hood fits and modify it if needed.

OEM 2007 Jeep Commander Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radiator Support found

View related parts
2007 Jeep Commander Upper Tie Bar Brace Part Number: 55396492AB
Product Specifications
- Other Name: Crossmember - Radiator Crossmember; Radiator Support Tie Bar Brace; Brace Radiator Crossmember
- Item Weight: 1.30 Pounds
- Item Dimensions: 17.5 x 2.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396492AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Radiator Support Parts and Q&A

Q: How to Install a Radiator Support on 2007 Jeep Commander?
A: First, install the upper crossmember and then submit the bolts found on the edge of the radiator crossmember. After that, fit the nuts to the crossmember support of the latch using an 11 Nm (8 ft. lbs.) torque. After that, fit the grille assembly and finally mount the hood seal. Check how well the hood fits and modify it if needed.