How to Install a Yaw Sensor on 2007 Jeep Commander?

Fill in the instructions for installing the dynamics sensor before attaching the yaw rate sensor. After that, connect the electrical connector to the structure. After that, attach the sensor with nuts on either side and tighten them to 9 Nm (80 in. lbs.). When all is done, put the console back into the floor.

OEM 2007 Jeep Commander Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2007 Jeep Commander Yaw Rate Sensor Part Number: 56029328AB
$217.86 MSRP: $326.00
You Save: $108.14 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.5 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029328AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Control Module Part Number: 56029349AA
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate; Module Electronic Stability
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.7 x 4.3 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029349AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Yaw Sensor Parts and Q&A

Q: How to Install a Yaw Sensor on 2007 Jeep Commander?
A: Fill in the instructions for installing the dynamics sensor before attaching the yaw rate sensor. After that, connect the electrical connector to the structure. After that, attach the sensor with nuts on either side and tighten them to 9 Nm (80 in. lbs.). When all is done, put the console back into the floor.