How to Service a Yaw Sensor on 2006 Jeep Commander?

Take out the center console first and then unplug electrical connector 3 off the first dynamics sensor. After that, remove the two nuts 2 that hold the sensor to the floor and take out the sensors. When setting up, attach the dynamics sensor to its previous location and link electrical connector 3. Tighten the two retaining nuts 2 to 9 Nm/80 inch lbs. after installing the sensor, then replace the floor console.

OEM 2006 Jeep Commander Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

View related parts
2006 Jeep Commander Yaw Rate Sensor Part Number: 56029328AB
$217.86 MSRP: $326.00
You Save: $108.14 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate.
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.5 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029328AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Control Module Part Number: 56029349AA
Product Specifications
- Other Name: Sensor - Dynamics; Electronic Stability System Control Module; ABS Control Module; Stab Control Module; Sensor Dynamics Lateral Acceleration And Yaw Rate; Module Electronic Stability
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.7 x 4.3 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029349AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Yaw Sensor Parts and Q&A

Q: How to Service a Yaw Sensor on 2006 Jeep Commander?
A: Take out the center console first and then unplug electrical connector 3 off the first dynamics sensor. After that, remove the two nuts 2 that hold the sensor to the floor and take out the sensors. When setting up, attach the dynamics sensor to its previous location and link electrical connector 3. Tighten the two retaining nuts 2 to 9 Nm/80 inch lbs. after installing the sensor, then replace the floor console.