How to Service and Repair a Rear Wheel Stud on 2007 Jeep Commander?

To service the rear wheel stud, fit the new stud to the hub flange, fit 3 washers on the stud and fit the lug nut. Tighten until it is firmly attached then check seating. The lug nut, washers, brake rotor and caliper, wheel and tire assembly should be installed and then taken off.

OEM 2007 Jeep Commander Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Stud found

View related parts
2007 Jeep Commander Wheel Stud, Front Part Number: 6036424AA
$8.06 MSRP: $11.70
You Save: $3.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud - Hub; Wheel Lug Stud, Front, Rear; Wheel Hub Repair Kit; Wheel Hub Bolt; Wheel Bolt; Hub & Bearing Bolt; Bolt Hub And Rotor; Stud Wheel; Stud Hub; Wheel Lug Stud
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6036424AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Wheel Stud Parts and Q&A

Q: How to Service and Repair a Rear Wheel Stud on 2007 Jeep Commander?
A: To service the rear wheel stud, fit the new stud to the hub flange, fit 3 washers on the stud and fit the lug nut. Tighten until it is firmly attached then check seating. The lug nut, washers, brake rotor and caliper, wheel and tire assembly should be installed and then taken off.