How to Remove and Replace Rear Brake Pads on 2007 Jeep Grand Cherokee?

First, support and hold the back of the vehicle, followed by removing the rear wheel and tire before replacing the brake pads. With a clean suction gun, remove just a bit of brake fluid from the master cylinder reservoir. Following this, insert the pistons into the caliper by prying the caliper up and over. Unscrew the four caliper slide pins and lift out the caliper from its anchor. Tie the caliper to a suspension piece with wire and check that the brake hose is not used to hold the caliper. After all the bolts are out, take the inboard and outboard brake pads out of the caliper.

OEM 2007 Jeep Grand Cherokee Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pads found

View related parts
2007 Jeep Grand Cherokee Brake Pads, Front Part Number: 5080868AC
$108.16 MSRP: $162.00
You Save: $53.84 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Replaced by: 5080868AD
- Replaces: 5080868AA
- Item Weight: 5.30 Pounds
- Item Dimensions: 10.1 x 5.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080868AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Brake Pads, Rear Part Number: 68034993AA
$134.54 MSRP: $145.00
You Save: $10.46 (8%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Rear Pads; Pad Kit Rear Disc Brake; Disc Brake Pad Set
- Position: Rear
- Replaces: 68003610AB, 68003610AA
- Item Weight: 3.70 Pounds
- Item Dimensions: 7.2 x 5.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68034993AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Pad Kit - Front Disc Brake Part Number: 5080868AD
$108.16 MSRP: $162.00
You Save: $53.84 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: FRONT DISC BRAKE
- Position: Front
- Item Weight: 5.50 Pounds
- Item Dimensions: 10.0 x 5.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080868AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Brake Pads, Front Part Number: 68002193AA
$452.10
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Front Disc Brake
- Position: Front
- Item Weight: 6.40 Pounds
- Item Dimensions: 9.7 x 5.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002193AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Brake Pad Parts and Q&A

Q: How to Remove and Replace Rear Brake Pads on 2007 Jeep Grand Cherokee?
A: First, support and hold the back of the vehicle, followed by removing the rear wheel and tire before replacing the brake pads. With a clean suction gun, remove just a bit of brake fluid from the master cylinder reservoir. Following this, insert the pistons into the caliper by prying the caliper up and over. Unscrew the four caliper slide pins and lift out the caliper from its anchor. Tie the caliper to a suspension piece with wire and check that the brake hose is not used to hold the caliper. After all the bolts are out, take the inboard and outboard brake pads out of the caliper.