How to Install an Engine Mount for Manual and Automatic Transmissions on 2007 Jeep Wrangler?

First, line up the skid plate's mounting plates with the studs on the support cushion, insert the nuts and tighten these to 28 Nm (21 ft. lbs.) torque for both manual and automatic transmission engines. After that, attach the bolts on the sill and tighten them to reach 75 Nm (55 ft. lbs.). After removing the transmission support, lower the car and then link the negative cable to the battery. After that, insert the mount bracket into the hole on the transmission and bolts, tighten them to a torque of 54 Nm (40 ft. lbs.). The support cushion for an automatic transmission should be installed onto the transmission mount bracket, along with the nut, torqued to a value of 41 Nm (30 ft. lbs.). After removing the support cushion bracket from the skid plate, put it back, installing the bolts and nuts and tighten the nuts to torque of 28 Nm (21 ft. lbs.).

OEM 2007 Jeep Wrangler Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Engine Mounts found

View related parts
2007 Jeep Wrangler Front Mount, Passenger Side Part Number: 52059940AD
$222.07 MSRP: $331.00
You Save: $108.93 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Isolator Engine Mount Left Side; Isolator Engine Mount
- Position: Passenger Side
- Replaces: 52059940AC
- Item Weight: 8.40 Pounds
- Item Dimensions: 5.5 x 6.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059940AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
2007 Jeep Wrangler Front Mount, Driver Side Part Number: 52059943AE
$240.20 MSRP: $356.00
You Save: $115.80 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Isolator Engine Mount
- Position: Driver Side
- Replaces: 52059943AD, 52059943AC
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.1 x 7.1 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059943AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 3.8L V6, 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Engine Mount Parts and Q&A

Q: How to Install an Engine Mount for Manual and Automatic Transmissions on 2007 Jeep Wrangler?
A: First, line up the skid plate's mounting plates with the studs on the support cushion, insert the nuts and tighten these to 28 Nm (21 ft. lbs.) torque for both manual and automatic transmission engines. After that, attach the bolts on the sill and tighten them to reach 75 Nm (55 ft. lbs.). After removing the transmission support, lower the car and then link the negative cable to the battery. After that, insert the mount bracket into the hole on the transmission and bolts, tighten them to a torque of 54 Nm (40 ft. lbs.). The support cushion for an automatic transmission should be installed onto the transmission mount bracket, along with the nut, torqued to a value of 41 Nm (30 ft. lbs.). After removing the support cushion bracket from the skid plate, put it back, installing the bolts and nuts and tighten the nuts to torque of 28 Nm (21 ft. lbs.).