How to Service and Repair a Rear Engine Mount on 2006 Jeep Wrangler?

Before beginning, detach the negative terminal from the battery and lift the vehicle to keep the transmission from tipping. Take off the nuts fastening the support cushion to the crossmember and remove the crossmember. Then, remove the nuts from the lower cushion and lift out the cushion and afterwards remove the bolts supporting the bracket to the transmission. To mount the slip plate, first attach the cushion with the right bolts and tighten each one properly. Slide the crossmember to your vehicle, hold it in place with the mount bolt and nut and then fasten the crossmember-to-sill bolts with torque at 41 Nm (30 ft. lbs.) degrees. Once done, pull out the transmission support, slowly lower the car and attach the negative battery cable.

OEM 2006 Jeep Wrangler Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2006 Jeep Wrangler Mount Bracket, Driver Side Part Number: 52059285AB
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic Transmission Mount, Left; Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059285AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Front Mount Part Number: 52019278AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Insulator; Insulator Engine Mount
- Replaces: 52019278AB, 52019278AC
- Item Weight: 2.10 Pounds
- Item Dimensions: 3.4 x 3.8 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52019278AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 6 Cyl 4.0 L GAS
View related parts
2006 Jeep Wrangler Mount Bracket, Passenger Side Part Number: 52059696AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 5.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059696AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2006 Jeep Wrangler Mount Bracket, Driver Side Part Number: 52059418AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 5.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059418AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2006 Jeep Wrangler Front Mount Part Number: 52019276AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator; Insulator Engine Mount
- Replaces: 52019276AC
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.8 x 4.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52019276AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2006 Jeep Wrangler Mount Bracket, Passenger Side Part Number: 52059284AC
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic Transmission Mount Bracket, Right; Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52059284AB
- Item Weight: 4.30 Pounds
- Item Dimensions: 7.0 x 5.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059284AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 6 Cyl 4.0 L GAS

2006 Jeep Wrangler Engine Mount Parts and Q&A

Q: How to Service and Repair a Rear Engine Mount on 2006 Jeep Wrangler?
A: Before beginning, detach the negative terminal from the battery and lift the vehicle to keep the transmission from tipping. Take off the nuts fastening the support cushion to the crossmember and remove the crossmember. Then, remove the nuts from the lower cushion and lift out the cushion and afterwards remove the bolts supporting the bracket to the transmission. To mount the slip plate, first attach the cushion with the right bolts and tighten each one properly. Slide the crossmember to your vehicle, hold it in place with the mount bolt and nut and then fasten the crossmember-to-sill bolts with torque at 41 Nm (30 ft. lbs.) degrees. Once done, pull out the transmission support, slowly lower the car and attach the negative battery cable.