How to Service and Repair a Power Steering Pump for a 3.8L Engine on 2007 Jeep Wrangler?

Before doing any service or repair on the 3.8L power steering pump, be sure to install the original pulley which may have been taken off. After, connect the pump to the engine, using three bolts, making certain they are secured and tightened to a value of 26 Nm (19 ft. lbs.). Link the pressure line to the pump and screw it on until it reaches 31 Nm (23 ft. lbs.). After that, add the supply hose. Once done, position the drive belt, flush the entire power steering system and inspect it for leaks. Afterward, attach the air box assembly again.

OEM 2007 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2007 Jeep Wrangler Power Steering Pump Part Number: 52059899AE
$130.74 MSRP: $190.00
You Save: $59.26 (32%)
Product Specifications
- Other Name: Pump - Power Steering With Pulley; Steering Pump, Mech; Pump Assembly Power Steering With Pulley
- Replaces: 52059899AD
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.5 x 9.6 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059899AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2007 Jeep Wrangler Power Steering Pump Parts and Q&A

Q: How to Service and Repair a Power Steering Pump for a 3.8L Engine on 2007 Jeep Wrangler?
A: Before doing any service or repair on the 3.8L power steering pump, be sure to install the original pulley which may have been taken off. After, connect the pump to the engine, using three bolts, making certain they are secured and tightened to a value of 26 Nm (19 ft. lbs.). Link the pressure line to the pump and screw it on until it reaches 31 Nm (23 ft. lbs.). After that, add the supply hose. Once done, position the drive belt, flush the entire power steering system and inspect it for leaks. Afterward, attach the air box assembly again.