How to Install a Power Steering Pump for a 3.8L Engine on 2008 Jeep Wrangler?

Start by attaching the pulley on the pump, if earlier removed, before the pump installation. Following that, fit the pump to the engine using three moutning bolts and tighten them to a torque of 26 Nm (19 ft. lbs.). Attach the pump's pressure line and tighten it to 31 Nm (23 ft. lbs.) and next join the supply hose. Once completed, put the drive belt in place and following the manual, fill and bleed the power steering. Remove any leaks and then put the air box assembly together.

OEM 2008 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

View related parts
2008 Jeep Wrangler Power Steering Pump Part Number: 52059899AE
$130.74 MSRP: $190.00
You Save: $59.26 (32%)
Product Specifications
- Other Name: Pump - Power Steering With Pulley; Steering Pump, Mech; Pump Assembly Power Steering With Pulley
- Replaces: 52059899AD
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.5 x 9.6 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52059899AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Wrangler Submodels:
- 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS

2008 Jeep Wrangler Power Steering Pump Parts and Q&A

Q: How to Install a Power Steering Pump for a 3.8L Engine on 2008 Jeep Wrangler?
A: Start by attaching the pulley on the pump, if earlier removed, before the pump installation. Following that, fit the pump to the engine using three moutning bolts and tighten them to a torque of 26 Nm (19 ft. lbs.). Attach the pump's pressure line and tighten it to 31 Nm (23 ft. lbs.) and next join the supply hose. Once completed, put the drive belt in place and following the manual, fill and bleed the power steering. Remove any leaks and then put the air box assembly together.