Other Name: Airbag - Driver; Steering Wheel Air Bag
Position: Driver Side
Replaces: 1EE14BD5AA
Item Weight: 4.50 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 1EE14BD5AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS
2008 Chrysler Crossfire Air Bag Parts and Q&A
Q: How to Install an Air Bag for the Driver's Knee Blocker on 2008 Chrysler Crossfire?
A: Before beginning the installation, first cut off the link to the negative battery terminal, wait two minutes and activate the supplemental restraint system off to avoid air bag activation and potential serious injuries to yourself. Remove the negative battery cable before installing the knee blocker air bag into the space for the instrument panel. After joining the electrical connector, screw the harness into place, then tighten both Knee Blocker retaining mounting bolts to a value of 21 Nm (178 in. lbs.). Connect the front of the air bag cover to the glove box and then put in the four lower screws for the Knee Blocker cover. Only attach the negative battery cable after the supplemental restraints system test has been performed. In the end, test the Supplemental Restraint System (Srs) - Verification Test.