How to Service and Repair an Air Bag Sensor on the Right Side on 2008 Chrysler Crossfire?

Always begin by disconnecting and separating the negative cable from the car battery, then wait two minutes to allow the air bag reserve capacitor to discharge before going further. Then, lift and support the vehicle appropriately, after that open the access panel found in the inner fender well. Displace the front impact sensor electrical connector, remove both mounting screws and remove the front impact sensor afterwards.

OEM 2008 Chrysler Crossfire Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2008 Chrysler Crossfire Side Impact Sensor Part Number: 68005690AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Sensor Air Bag
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68005690AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Side Impact Sensor Part Number: 5099300AA
Product Specifications
- Other Name: Sensor - Air Bag; Air Bag Impact Sensor; Air Bag Sensor; Side Sensor; Sensor Air Bag
- Item Weight: 1.10 Pounds
- Item Dimensions: 0.3 x 0.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099300AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Air Bag Sensor Parts and Q&A

Q: How to Service and Repair an Air Bag Sensor on the Right Side on 2008 Chrysler Crossfire?
A: Always begin by disconnecting and separating the negative cable from the car battery, then wait two minutes to allow the air bag reserve capacitor to discharge before going further. Then, lift and support the vehicle appropriately, after that open the access panel found in the inner fender well. Displace the front impact sensor electrical connector, remove both mounting screws and remove the front impact sensor afterwards.