How to Service and Repair a Rocker Arm Assembly on 2008 Chrysler Crossfire?

Before working on the rocker arm assembly, take off the camshaft bearing bridge while wearing proper clothing, safety glasses and gloves and make sure not to hit the shaft so hard that it could damage the bearing bridge or hollow rocker arm shaft. Put a 16 mm drift inside and use it to push out the rocker shaft. If the bearing resists, heat it up to a temperature no greater than 160°C. If after removing the rocker arms you find that the rocker arm bearing has longitudinal scoring, you should get a new rocker arm. Lastly, make sure to clean every part carefully.

OEM 2008 Chrysler Crossfire Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rocker Arms found

View related parts
2008 Chrysler Crossfire Intake Rocker Arm Part Number: 5098180AA
$169.64 MSRP: $215.04
You Save: $45.40 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Rocker Arm Intake
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098180AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Exhaust Rocker Arms Part Number: 5098438AA
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098438AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited | 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Rocker Arm Parts and Q&A

Q: How to Service and Repair a Rocker Arm Assembly on 2008 Chrysler Crossfire?
A: Before working on the rocker arm assembly, take off the camshaft bearing bridge while wearing proper clothing, safety glasses and gloves and make sure not to hit the shaft so hard that it could damage the bearing bridge or hollow rocker arm shaft. Put a 16 mm drift inside and use it to push out the rocker shaft. If the bearing resists, heat it up to a temperature no greater than 160°C. If after removing the rocker arms you find that the rocker arm bearing has longitudinal scoring, you should get a new rocker arm. Lastly, make sure to clean every part carefully.