How to Install a Washer Pump for Your Windshield on 2008 Chrysler Pacifica?

When installing or replacing the windshield washer pump, start with a fresh grommet in the reservoir. After putting in the grommet, put the washer pump motor (4 or 5) in the hole and make sure it snaps inside. Then, add the electrical connector from the washer pump to the base of the machine and fix the washer hose to the pump motor. After that, fit the inner splash shield and let the vehicle down from the hoist. Attach the battery negative cable again, add washer fluid to the reservoir and shut the hood.

OEM 2008 Chrysler Pacifica Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2008 Chrysler Pacifica Washer Pump Part Number: 5159075AA
Product Specifications
- Other Name: Washer Pump - Windshield Washer; Windshield Washer Pump; Washer Pump Repair Kit; Pump Windshield Washer Dual Outlet; Pump Washer, Liftgate
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.4 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5159075AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Washer Pump Parts and Q&A

Q: How to Install a Washer Pump for Your Windshield on 2008 Chrysler Pacifica?
A: When installing or replacing the windshield washer pump, start with a fresh grommet in the reservoir. After putting in the grommet, put the washer pump motor (4 or 5) in the hole and make sure it snaps inside. Then, add the electrical connector from the washer pump to the base of the machine and fix the washer hose to the pump motor. After that, fit the inner splash shield and let the vehicle down from the hoist. Attach the battery negative cable again, add washer fluid to the reservoir and shut the hood.