How to Install a Trunk Lid Latch on 2008 Chrysler Pacifica?

Line up the latch (1) on your vehicle and then, after locking the link, install it. Secure the latch onto the liftgate with screws (3) and tighten them to 11 Nm or 95 in. lbs. Run a wire connector (2) from the switch to the latch on the liftgate, verify that the gate moves properly and change the setting as needed. Make sure to add the lower liftgate trim panel as the final step.

OEM 2008 Chrysler Pacifica Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Lid Latches found

View related parts
2008 Chrysler Pacifica Lock, Rear Part Number: 5102339AA
$142.01 MSRP: $163.00
You Save: $20.99 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 5102339AB
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.4 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102339AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Lock, Rear Part Number: 4719860AC
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaces: 4719860AB
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.1 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4719860AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Trunk Lid Latch Parts and Q&A

Q: How to Install a Trunk Lid Latch on 2008 Chrysler Pacifica?
A: Line up the latch (1) on your vehicle and then, after locking the link, install it. Secure the latch onto the liftgate with screws (3) and tighten them to 11 Nm or 95 in. lbs. Run a wire connector (2) from the switch to the latch on the liftgate, verify that the gate moves properly and change the setting as needed. Make sure to add the lower liftgate trim panel as the final step.