Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Chrysler Pacifica Fuel Pump

Gas Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Pumps found

  • 2008 Chrysler Pacifica Fuel Pump - 68028057AB
    2008 Chrysler Pacifica Fuel Pump Diagram - 68028057AB
    View related parts

    2008 Chrysler Pacifica Fuel Pump, Driver Side Part Number: 68028057AB

    $446.42 MSRP: $679.00
    You Save: $232.58 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Left; Fuel Level Sensor; Fuel Sending Unit.; Fuel Gauge Sending Unit
    • Position: Driver Side
    • Replaces: 68028057AA, 5101803AE
    • Item Weight: 4.40 Pounds
    • Item Dimensions: 9.8 x 11.8 x 18.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68028057AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
  • 2008 Chrysler Pacifica Fuel Pump - 5101805AE
    2008 Chrysler Pacifica Fuel Pump Diagram - 5101805AE
    View related parts

    2008 Chrysler Pacifica Fuel Pump, Passenger Side Part Number: 5101805AE

    $352.50 MSRP: $538.00
    You Save: $185.50 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Right; Fuel Module Assembly; Fuel Level Sensor.; Fuel Gauge Sending Unit; Fuel Pump Assembly; Module Kit Fuel Pump/Level Unit
    • Position: Passenger Side
    • Replaces: 5101805AD
    • Item Weight: 3.00 Pounds
    • Item Dimensions: 9.4 x 12.3 x 18.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5101805AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Fuel Pump Parts and Q&A

  • Q: How to Service and Repair a Fuel Pump on 2008 Chrysler Pacifica?
    A: First, lift off the fuel tank and clean around the fuel pump module to make sure no dirt gets into the fuel lines. Wash the area you want to repair using the right cleaner, then dry it using filtered compressed air at a low pressure. Disconnect the vapor and electrical wires, loosen the lock ring on the Fuel Pump Module with a brass punch, being careful to only contact the set sections. After that, remove the top of the fuel pump module and use the allowed siphoning tools to empty the fuel into an approved container. Unplug the electrical part first and then make sure the wire linking the passenger side level sensor is removed before you take out the reservoir from the tank. Find where the return line and fuel supply line tab locations are on the fuel pump module. Lift up the top tab on the return line with a small screwdriver, let it tip over and then do the same at the top of the pump module for the fuel line. Do not damage or break the locking tabs or supply line fitting. Tilt the fuel pump module over to drain out any end-up fuel in the reservoir and then take off the entire fuel pump unit.

Related 2008 Chrysler Pacifica Parts

Alternate Year Models

+
2007 Chrysler Pacifica Fuel Pump