Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Chrysler Pacifica Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

  • 2008 Chrysler Pacifica Power Steering Pump - 4743805AD
    2008 Chrysler Pacifica Power Steering Pump Diagram - 4743805AD
    View related parts

    2008 Chrysler Pacifica Power Steering Pump Part Number: 4743805AD

    $60.75 MSRP: $379.00
    You Save: $318.25 (84%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Power Steering; Pump Power Steering; Pump
    • Item Weight: 4.30 Pounds
    • Item Dimensions: 11.6 x 7.1 x 6.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4743805AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX | 6 Cyl 3.8 L GAS
  • 2008 Chrysler Pacifica Power Steering Pump - R4880348AB
    2008 Chrysler Pacifica Power Steering Pump Diagram - R4880348AB
    View related parts

    2008 Chrysler Pacifica Power Steering Pump Part Number: R4880348AB

    Product Specifications
    • Other Name: Pump - Power Steering With Pulley; Pump Assembly Power Steering With Pulley
    • Item Weight: 4.10 Pounds
    • Item Dimensions: 11.4 x 8.2 x 5.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: R4880348AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Pacifica Submodels:
    • Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Power Steering Pump Parts and Q&A

  • Q: How to Maintain and Fix a Power Steering Pump on 2008 Chrysler Pacifica?
    A: You should first disconnect the negative battery cable and isolate it to work on or repair the power steering pump. After that, take off the cover of the power steering fluid reservoir and connect a siphon pump to remove all of the fluid. Following that, remove the air cleaner housing and all hoses from the engine. After that, remove the accessory drive belt. Following that, take out the clamp and remove the hose leading from the reservoir. You can unscrew the tube nut at the pump end to take out the pressure hose from the pump pump. With that done, take out the pump along with its pulley and reservoir by undoing the bolts holding the pump in place outside the engine. If the pulley must be taken off, use the correct technique for the job.

Related 2008 Chrysler Pacifica Parts

Alternate Year Models

+
2007 Chrysler Pacifica Power Steering Pump