How to Properly Assemble and Install an Exhaust Pipe on 2008 Chrysler PT Cruiser?

While putting together the exhaust system, do not tighten the clamps until all the parts are lined up and no rubbing is happening. After that, place the intermediate pipe and the isolator supports under the car and finish by adding the muffler. Working in order, attach each component to keep its position and proper space apart from any underbody elements, as required by the instructions. Clamp the bands with a torque of 47 Nm (35 ft. lbs.), because tightening them further risks their stretching against the center block, leading to a weak clamp that must be replaced. To change a band clamp, first remove its nut and take off the clamp ends until the spot weld comes apart, then grind or file the weld until the area looks even. When installation finishes, check for exhaust leaks, fix these as needed and test for contact between the exhaust system and your car panels, adjusting them as needed.

OEM 2008 Chrysler PT Cruiser Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Exhaust Pipes found

View related parts
2008 Chrysler PT Cruiser Exhaust Pipe Part Number: 5278194AC
$192.03 MSRP: $291.00
You Save: $98.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Extension; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Item Weight: 9.70 Pounds
- Item Dimensions: 93.5 x 21.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278194AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Catalytic Converter Part Number: 5085905AC
$3227.38 MSRP: $4695.00
You Save: $1467.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Item Weight: 15.30 Pounds
- Item Dimensions: 38.2 x 6.7 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085905AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Catalytic Converter Part Number: 5085658AB
$3124.33 MSRP: $4565.00
You Save: $1440.67 (32%)
Product Specifications
- Other Name: Converter - Exhaust; Converter; Pipe And Converter Exhaust; Converter Catalytic
- Item Weight: 38.90 Pounds
- Item Dimensions: 37.7 x 21.0 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085658AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Exhaust Pipe Part Number: 5085910AC
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5085910AB
- Item Weight: 12.70 Pounds
- Item Dimensions: 56.2 x 17.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085910AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Muffler Part Number: 5085267AF
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5085267AC, 5085267AE, 5085267AD
- Item Weight: 24.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085267AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Muffler Part Number: 5290586AD
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator
- Replaces: 5278853AF, 5290586AB, 5278853AG, 5290586AC, 5278853AH
- Item Weight: 20.00 Pounds
- Item Dimensions: 38.1 x 21.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290586AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Muffler Part Number: 5278503AH
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler Exhaust
- Replaces: 5278503AF, 5278503AC, 5278503AD, 5278503AG, 5278503AE
- Item Weight: 18.20 Pounds
- Item Dimensions: 37.7 x 18.6 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278503AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Muffler Part Number: 5278195AG
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Exhaust Muffler Assembly; Direct-Fit Exhaust; Exhaust System Kit; Resonator; Muffler And Tailpipe Exhaust; Muffler Exhaust
- Replaces: 5278195AD, 5278195AC, 5278195AF, 5278195AE
- Item Weight: 17.80 Pounds
- Item Dimensions: 38.9 x 20.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278195AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Catalytic Converter Part Number: 5085980AD
Product Specifications
- Other Name: Converter - Exhaust; Converter; Pipe And Converter Exhaust; Converter Catalytic
- Item Weight: 15.50 Pounds
- Item Dimensions: 48.5 x 6.6 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085980AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2008 Chrysler PT Cruiser Catalytic Converter Part Number: 5085700AB
Product Specifications
- Other Name: Converter - Catalytic; Converter; Converter Catalytic
- Item Weight: 14.00 Pounds
- Item Dimensions: 38.1 x 9.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085700AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, GT, Limited, Touring | 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Exhaust Pipe Parts and Q&A

Q: How to Properly Assemble and Install an Exhaust Pipe on 2008 Chrysler PT Cruiser?
A: While putting together the exhaust system, do not tighten the clamps until all the parts are lined up and no rubbing is happening. After that, place the intermediate pipe and the isolator supports under the car and finish by adding the muffler. Working in order, attach each component to keep its position and proper space apart from any underbody elements, as required by the instructions. Clamp the bands with a torque of 47 Nm (35 ft. lbs.), because tightening them further risks their stretching against the center block, leading to a weak clamp that must be replaced. To change a band clamp, first remove its nut and take off the clamp ends until the spot weld comes apart, then grind or file the weld until the area looks even. When installation finishes, check for exhaust leaks, fix these as needed and test for contact between the exhaust system and your car panels, adjusting them as needed.