JeepParts
My Garage
My Account
Cart
OEM 2008 Chrysler PT Cruiser Power Steering Cooler
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Power Steering Coolers found
2008 Chrysler PT Cruiser Power Steering Cooler Part Number: 5272319AM
$160.56 MSRP: $239.00You Save: $78.44 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose - Power Steering Pressure; Power Steering Pressure Hose; Power Steering Hose; Pressure Hose
- Replaces: 5272319AG, 5272319AI, 5272319AL, 5272319AK, 5272319AJ, 5272319AH
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.8 x 26.5 x 35.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272319AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Product Specifications- Other Name: Cooler - Power Steering; Power Steering Cooler, Front; Cooler Power Steering Cooler Includes Hose, Gear To Cooler, And Hose, Cooler To Reservoir
- Position: Front
- Replaces: 5272354AC, 5272354AE, 5272354AB, 5272354AD
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.2 x 9.2 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272354AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
- Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler, Front; Cooler Power Steering Cooler Includes Hose, Gear To Cooler, And Hose, Cooler To Reservoir
- Position: Front
- Replaces: 5272494AD, 5272494AE
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.7 x 12.1 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272494AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Chrysler PT Cruiser Power Steering Cooler Parts and Q&A
- Q: How to install a Power Steering Cooler on Non-Turbocharged on 2008 Chrysler PT Cruiser?A: To place the power steering cooler onto a car without a turbo that uses an additional cooler outside, cup the steel fitting on the power steering gear with the inlet hose and push a hose clamp over the nearby end. With a left-hand drive vehicle, match the outlet tube of the cooler to the clamp on the right front of the housing's opening and snap it in position, followed by closing the clamp. Now, put the inlet hose for the cooler (with cooler 2 attached) onto fitting 1 for the steering gear and use the hose clamp to seal it in place. Attach screws 4 to cooler 2 and insert them into the front suspension crossmember 3. Tighten both screws to 10 Nm (90 in. lbs.). For right-hand drive, lower the cooler inlet (attached to cooler 2) onto fitting 1 at the steering gear and attach it with a clamp, then attach each screw at cooler 2 to the suspension crossmember with a tightness of 10 Nm. After that, run the fluid return hose 3 over the connector end of the cooler and fasten it with a clamp, making sure it passes over the bead on the cooler tube opening. Drop the vehicle to install steering parts, fill and bleed the system and check it for leaks.
Related 2008 Chrysler PT Cruiser Parts
2008 Chrysler PT Cruiser Power Steering Pump
2008 Chrysler PT Cruiser Power Steering Hose
2008 Chrysler PT Cruiser Power Steering Reservoir
2008 Chrysler PT Cruiser Rack And Pinion
2008 Chrysler PT Cruiser Steering Column
2008 Chrysler PT Cruiser Steering Column Cover
2008 Chrysler PT Cruiser Steering Gear Box
2008 Chrysler PT Cruiser Steering Shaft
2008 Chrysler PT Cruiser Steering Wheel
2008 Chrysler PT Cruiser Tie Rod End