How to Install the A/C Switch and Start the Actuator Calibration Process on 2008 Chrysler Sebring?

Attach the A/C-heater control to the center of the bezel on the back of the console and secure it with the four screws, operating each screw to achieved 2 Nm (17 in. lbs.). After that, install the console bezel and attach the negative side of the battery cable again. The first time you start your car after installing or repairing an A/C-heater control, the Actuator Calibration will be applied automatically. If the A/C-heater control is being installed in a vehicle in which it was already installed, the Actuator Calibration must be done using a scan tool. When required, use the scan tool to start the Actuator Calibration function.

OEM 2008 Chrysler Sebring A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2008 Chrysler Sebring Heater Control Part Number: 5058269AH
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 5058269AC, 5058269AD, 5058269AE, 5058269AF, 5058269AG
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.2 x 4.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5058269AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Heater Control Part Number: 55111937AB
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 55111889AB, 55111889AA, 5058100AF, 5058100AE, 5058100AD, 55111937AA, 5058100AC
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 5.8 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111937AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring A/C Switch Parts and Q&A

Q: How to Install the A/C Switch and Start the Actuator Calibration Process on 2008 Chrysler Sebring?
A: Attach the A/C-heater control to the center of the bezel on the back of the console and secure it with the four screws, operating each screw to achieved 2 Nm (17 in. lbs.). After that, install the console bezel and attach the negative side of the battery cable again. The first time you start your car after installing or repairing an A/C-heater control, the Actuator Calibration will be applied automatically. If the A/C-heater control is being installed in a vehicle in which it was already installed, the Actuator Calibration must be done using a scan tool. When required, use the scan tool to start the Actuator Calibration function.