How to Install an HVAC Pressure Switch on 2008 Chrysler Sebring?

Place the approved O-ring and only the correct refrigerant oil for your A/C compressor around the Refrigerant Pressure Sensor / Switch when installing. Start by smearing refrigerant oil on a clean O-ring seal (4) and putting it onto the A/C discharge line (3). After that, connect and secure the HVAC pressure switch (2) to the A/C discharge line. At this point, attach the wire harness connector (1) to the HVAC pressure switch and then replace the negative battery cable.

OEM 2008 Chrysler Sebring HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 HVAC Pressure Switches found

View related parts
2008 Chrysler Sebring Pressure Switch Part Number: 5174039AB
$115.67 MSRP: $172.00
You Save: $56.33 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, Limited, LX, Touring, TSi | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Check Valve Part Number: 5189373AA
$29.06 MSRP: $31.95
You Save: $2.89 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High & Low Side Charging Adapters; Service Valve Core.; Service Valve; Line Valve; Liquid Line Valve; Valve Core A/C Line
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189373AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Check Valve, Rear Part Number: 5003862AA
$4.62 MSRP: $6.95
You Save: $2.33 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; High Side Adapter; Valve Core; Compressor Cut-Out; HVAC Switch; Trinary Switch; Pressure Switch; Fill Valve; Suction, Liquid, Discharge Line Valves; A/C Check Valve Core.
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 0.8 x 0.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5003862AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring HVAC Pressure Switch Parts and Q&A

Q: How to Install an HVAC Pressure Switch on 2008 Chrysler Sebring?
A: Place the approved O-ring and only the correct refrigerant oil for your A/C compressor around the Refrigerant Pressure Sensor / Switch when installing. Start by smearing refrigerant oil on a clean O-ring seal (4) and putting it onto the A/C discharge line (3). After that, connect and secure the HVAC pressure switch (2) to the A/C discharge line. At this point, attach the wire harness connector (1) to the HVAC pressure switch and then replace the negative battery cable.