How to Remove and Replace a Rear Brake Disc on 2008 Chrysler Sebring?

Before beginning, put the vehicle on jack stands and raise it safely. Following this, take out the nuts that secure the wheel to the mount and also remove the entire wheel and tire. Sometimes, taking out the pads by adjusting the inboard caliper distances allows enough room to remove it with the help of the guide pins. While you work, pay attention to the flex hose so that it stays within its range and isn't damaged as you move the caliper upward. Turn the caliper over halfway to allow for brake rotor removal and hold it in this spot with either wire or a bungee cord. Slide the brake rotor off the hub and bearing and then remove it.

OEM 2008 Chrysler Sebring Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Discs found

View related parts
2008 Chrysler Sebring Rotor, Rear Part Number: 5105515AA
$77.99 MSRP: $117.00
You Save: $39.01 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 9.30 Pounds
- Item Dimensions: 2.6 x 10.7 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105515AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Rotor, Front Part Number: 5105514AA
$83.79 MSRP: $126.00
You Save: $42.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 15.90 Pounds
- Item Dimensions: 2.2 x 12.3 x 12.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105514AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Brake Disc Parts and Q&A

Q: How to Remove and Replace a Rear Brake Disc on 2008 Chrysler Sebring?
A: Before beginning, put the vehicle on jack stands and raise it safely. Following this, take out the nuts that secure the wheel to the mount and also remove the entire wheel and tire. Sometimes, taking out the pads by adjusting the inboard caliper distances allows enough room to remove it with the help of the guide pins. While you work, pay attention to the flex hose so that it stays within its range and isn't damaged as you move the caliper upward. Turn the caliper over halfway to allow for brake rotor removal and hold it in this spot with either wire or a bungee cord. Slide the brake rotor off the hub and bearing and then remove it.