How to Remove and Replace a Clock Spring Assembly on 2008 Chrysler Town & Country?

To replace the Clock Spring Assembly take the SRS by disconnecting the battery negative cable by waiting for two minutes. Make sure the Centering of Clock Spring is done correctly, Connect switches are engaged and Wire harnesses are reconnected. When reinstalling the steering wheel, tighten screws, reinstall shrouds and check for alignment. Finally reconnect the airbag and battery.

OEM 2008 Chrysler Town & Country Clock Spring

Spiral Cable Clock Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clock Springs found

View related parts
2008 Chrysler Town & Country Clockspring Part Number: 68025044AA
Product Specifications
- Other Name: Clockspring - Steering Column Control Module; Air Bag Clockspring
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025044AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Town & Country Clockspring Part Number: 56046241AC
Product Specifications
- Other Name: Clockspring - Steering Angle/Clockspring; Air Bag Clockspring; Sensor Steering Angle/Clockspring Assembly
- Replaces: 56046119AB, 56046241AA, 56046241AB, 56046119AA, 68036567AA, 68036567AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.3 x 7.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56046241AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Clock Spring Parts and Q&A

Q: How to Remove and Replace a Clock Spring Assembly on 2008 Chrysler Town & Country?
A: To replace the Clock Spring Assembly take the SRS by disconnecting the battery negative cable by waiting for two minutes. Make sure the Centering of Clock Spring is done correctly, Connect switches are engaged and Wire harnesses are reconnected. When reinstalling the steering wheel, tighten screws, reinstall shrouds and check for alignment. Finally reconnect the airbag and battery.