How to service an Oil Pressure Switch on 2008 Chrysler Town & Country?

Raise the car on a hoist and lay an oil collecting container beneath the switch area to address the oil pressure sender. Then, remove the electrical connector and turn the oil pressure switch out of the oil pump.

OEM 2008 Chrysler Town & Country Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Chrysler Town & Country Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2008 Chrysler Town & Country?
A: Raise the car on a hoist and lay an oil collecting container beneath the switch area to address the oil pressure sender. Then, remove the electrical connector and turn the oil pressure switch out of the oil pump.