How to Extract the Crankshaft from an Engine on 2008 Chrysler Town & Country?

To get started, lift out the engine and take out the oil pan. Then, detach both the oil pickup tube and the windage tray and next remove the front timing belt cover. Then, remove the timing belt and tensioner and then take off the crankshaft sprocket. Pull the dowel pin out of the crankshaft and take out the oil pump assembly. After that, remove the rear seal retainer on the crankshaft. Instead of stamping the bearing caps with a metal tool, it's better to mark them using a scribe or paint. Carefully remove the connecting rod bearing caps and be sure to note their marks since they do not fit in place of the main bearing caps which should also be removed after marking. Lastly, take the crankshaft out of where it was installed in the cylinder block. Before placing the crankshaft, you need to set the main bearings and install all the connecting rod bearings correctly.

OEM 2008 Chrysler Town & Country Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshafts found

View related parts
2008 Chrysler Town & Country Crankshaft Part Number: 4621983AD
$299.79 MSRP: $1045.00
You Save: $745.21 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft
- Replaces: 4621983AB
- Item Weight: 47.30 Pounds
- Item Dimensions: 25.8 x 8.2 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621983AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2008 Chrysler Town & Country Pulley Part Number: 4892108AA
Product Specifications
- Other Name: Crankshft; Harmonic Balancer; Crankshaft
- Item Weight: 52.20 Pounds
- Item Dimensions: 23.7 x 9.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892108AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Town & Country Crankshaft Part Number: 4781507AD
Product Specifications
- Other Name: Crankshft
- Replaces: 4781507AC, 4781071AB, 4781071AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781507AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Town & Country Submodels:
- EL, EX, LX, LXi, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.8L V6, 6 Cyl 3.8 L GAS

2008 Chrysler Town & Country Crankshaft Parts and Q&A

Q: How to Extract the Crankshaft from an Engine on 2008 Chrysler Town & Country?
A: To get started, lift out the engine and take out the oil pan. Then, detach both the oil pickup tube and the windage tray and next remove the front timing belt cover. Then, remove the timing belt and tensioner and then take off the crankshaft sprocket. Pull the dowel pin out of the crankshaft and take out the oil pump assembly. After that, remove the rear seal retainer on the crankshaft. Instead of stamping the bearing caps with a metal tool, it's better to mark them using a scribe or paint. Carefully remove the connecting rod bearing caps and be sure to note their marks since they do not fit in place of the main bearing caps which should also be removed after marking. Lastly, take the crankshaft out of where it was installed in the cylinder block. Before placing the crankshaft, you need to set the main bearings and install all the connecting rod bearings correctly.