How to Remove and Replace a Wheel Cylinder on 2008 Dodge Caliber?

Before doing anything else, stop any brake fluid release by pressing the brake pedal down another inch after using the brake pedal holder to separate the system from the master cylinder. After that, lift and secure the vehicle and after that take out the three nuts holding the wheel mount and remove the whole assembly. Lift the drum brake shoes off their place on the support plate. Disconnect the brake tube from the wheel cylinder and after that detach the fitting screws that hold it in place. Remember to disconnect and take the wheel cylinder off of the support plate.

OEM 2008 Dodge Caliber Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2008 Dodge Caliber Wheel Cylinder, Rear Part Number: 5191305AA
$71.08 MSRP: $108.00
You Save: $36.92 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Wheel; Drum Brake Wheel Cylinder, Rear; Wheel Cylinder Repair Kit; Cylinder Assembly Wheel; Cylinder Wheel
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.1 x 3.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191305AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Wheel Cylinder Parts and Q&A

Q: How to Remove and Replace a Wheel Cylinder on 2008 Dodge Caliber?
A: Before doing anything else, stop any brake fluid release by pressing the brake pedal down another inch after using the brake pedal holder to separate the system from the master cylinder. After that, lift and secure the vehicle and after that take out the three nuts holding the wheel mount and remove the whole assembly. Lift the drum brake shoes off their place on the support plate. Disconnect the brake tube from the wheel cylinder and after that detach the fitting screws that hold it in place. Remember to disconnect and take the wheel cylinder off of the support plate.