How to Remove and Replace a Wheel Cylinder on 2007 Dodge Caliber?

Before you start, take all needed steps to ensure your safety, according to the warnings given. Use a brake pedal holder to press the brake pedal 1 inch into the floor and hold it there which will stop the reserve from draining. After that, get the vehicle securely up, remove the nuts that hold the wheels onto the mounts and take off the whole tire/wheel assembly. Open the brakes and remove both the shoes from the support plate. First, remove the brake tube at the wheel cylinder and then take away the wheel cylinder screws. The last task is to take the wheel cylinder off the support plate.

OEM 2007 Dodge Caliber Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2007 Dodge Caliber Wheel Cylinder, Rear Part Number: 5191305AA
$71.08 MSRP: $108.00
You Save: $36.92 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Wheel; Drum Brake Wheel Cylinder, Rear; Wheel Cylinder Repair Kit; Cylinder Assembly Wheel; Cylinder Wheel
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.1 x 3.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191305AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Wheel Cylinder Parts and Q&A

Q: How to Remove and Replace a Wheel Cylinder on 2007 Dodge Caliber?
A: Before you start, take all needed steps to ensure your safety, according to the warnings given. Use a brake pedal holder to press the brake pedal 1 inch into the floor and hold it there which will stop the reserve from draining. After that, get the vehicle securely up, remove the nuts that hold the wheels onto the mounts and take off the whole tire/wheel assembly. Open the brakes and remove both the shoes from the support plate. First, remove the brake tube at the wheel cylinder and then take away the wheel cylinder screws. The last task is to take the wheel cylinder off the support plate.