How to Properly Machine Brake Drums on a Drum Lathe on 2008 Dodge Dakota?

The first set of cuts started by the drum lathe on brake drums must not exceed 0.12 to 0.20 mm (0.005 to 0.008 in.), then a final set of thinner cuts is used to improve the surface finish and the recommended thickness is 0.025 to 0.038 mm (0.001 to 0.0015 in.). Always tighten the drum onto the lathe securely and apply a damper strap around the drum to keep it from vibrating and avoid chatter marks. The largest diameter the drum braking surface can have is stamped or cast on the drum and it must be replaced if machining causes it to go beyond that.

OEM 2008 Dodge Dakota Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2008 Dodge Dakota Drum, Rear Part Number: 52013438AF
$432.64 MSRP: $569.00
You Save: $136.36 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake Rear; Drum Brake; Brake Drum
- Position: Rear
- Replaces: 52013438AE
- Item Weight: 28.60 Pounds
- Item Dimensions: 16.2 x 15.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52013438AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Dakota Brake Drum Parts and Q&A

Q: How to Properly Machine Brake Drums on a Drum Lathe on 2008 Dodge Dakota?
A: The first set of cuts started by the drum lathe on brake drums must not exceed 0.12 to 0.20 mm (0.005 to 0.008 in.), then a final set of thinner cuts is used to improve the surface finish and the recommended thickness is 0.025 to 0.038 mm (0.001 to 0.0015 in.). Always tighten the drum onto the lathe securely and apply a damper strap around the drum to keep it from vibrating and avoid chatter marks. The largest diameter the drum braking surface can have is stamped or cast on the drum and it must be replaced if machining causes it to go beyond that.