Other Name: Spring - Front Coil; Coil Spring, Front; Coil Springs; Spring Front Coil
Position: Front
Item Weight: 10.40 Pounds
Item Dimensions: 13.3 x 4.5 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68033149AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
2008 Dodge Dakota Coil Springs Parts and Q&A
Q: How Are Front Coil Springs Installed on 2008 Dodge Dakota?
A: Start by setting in the lower isolator, next by placing the upper isolator. Put the shock into the top space of the coil spring and then place the upper mounting plate. Attach the shock nut wrench 9362 to the hex head at the end of the shock shaft and slide a 8 mm socket through the wrench into the hex. With the shock shaft fixed so it won't turn, tighten the nut until you measure 45 Nm (33 ft. lbs.) of torque. After that, fit the shock upper mounting nut in place and loosen the spring coil. Taked off the shock assembly from the spring compressor tool and install it.