How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Dodge Dakota?

First, place the oil pressure switch and then join the two ends of the connector. After that, put on the front splash shield and guide the vehicle downwards. After that, attach the end of the black battery cable to the negative post on the other battery. Turn on the engine and check from under the engine for oil coming from the oil pressure switch.

OEM 2009 Dodge Dakota Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2009 Dodge Dakota Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX

2009 Dodge Dakota Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch for a Fuel Pump on 2009 Dodge Dakota?
A: First, place the oil pressure switch and then join the two ends of the connector. After that, put on the front splash shield and guide the vehicle downwards. After that, attach the end of the black battery cable to the negative post on the other battery. Turn on the engine and check from under the engine for oil coming from the oil pressure switch.