How to Install a TPMS Sensor on 2008 Dodge Dakota?

To install a tire pressure sensor, replace the valve cap, core and the seal. Clean the wheel area, insert the sensor and hand tighten the nut to 6 Nm. Place the sensor valve stem away from the tire changer, set air pressure and drive for 10 minutes to allow the system to learn the new sensor ID.

OEM 2008 Dodge Dakota TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 TPMS Sensor found

View related parts
2008 Dodge Dakota TPMS Sensor Part Number: 56029319AC
$67.98 MSRP: $101.00
You Save: $33.02 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor Tire Pressure
- Replaces: 56029319AB, 56029319AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 2.7 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029319AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, Sport, ST, SXT, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX

2008 Dodge Dakota TPMS Sensor Parts and Q&A

Q: How to Install a TPMS Sensor on 2008 Dodge Dakota?
A: To install a tire pressure sensor, replace the valve cap, core and the seal. Clean the wheel area, insert the sensor and hand tighten the nut to 6 Nm. Place the sensor valve stem away from the tire changer, set air pressure and drive for 10 minutes to allow the system to learn the new sensor ID.