How to Install a Blower Motor in the Rear on 2008 Dodge Durango?

Fit the rear blower motor into the rear air inlet housing and then use the three screws to secure it, tightening them to 2.2 Nm (20 in. lbs.). Hook the wire harness connector for the rear HVAC to the blower motor and after that, install the rear HVAC housing. Lastly, put back the negative battery cable.

OEM 2008 Dodge Durango Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

View related parts
2008 Dodge Durango Blower Motor, Rear Part Number: 5019640AB
$118.88 MSRP: $197.00
You Save: $78.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Rear; Motor Blower With Wheel
- Position: Rear
- Replaces: 5019640AA
- Item Weight: 3.70 Pounds
- Item Dimensions: 10.0 x 9.9 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019640AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2008 Dodge Durango Blower Motor, Front Part Number: 5061381AA
$208.30 MSRP: $308.00
You Save: $99.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Blower With Wheel; HVAC Blower Motor, Front; Blower Assembly; Motor Blower With Wheel And Cap; HVAC Blower Motor
- Position: Front
- Item Weight: 5.60 Pounds
- Item Dimensions: 11.5 x 11.4 x 9.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5061381AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Blower Motor, Front Upper Part Number: 68057727AA
Product Specifications
- Other Name: Housing - A/C And Heater; HVAC Unit Case, Front Upper; HVAC Unit Case Assembly; Housing Assembly; Case Assembly; A/C & Heater Case
- Position: Front Upper
- Replaces: 68019146AA, 5166115AA
- Item Weight: 9.90 Pounds
- Item Dimensions: 40.8 x 22.1 x 26.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68057727AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Dodge Durango Blower Motor Parts and Q&A

Q: How to Install a Blower Motor in the Rear on 2008 Dodge Durango?
A: Fit the rear blower motor into the rear air inlet housing and then use the three screws to secure it, tightening them to 2.2 Nm (20 in. lbs.). Hook the wire harness connector for the rear HVAC to the blower motor and after that, install the rear HVAC housing. Lastly, put back the negative battery cable.