How to Install an HVAC Pressure Switch on 2008 Dodge Durango?

The Refrigerant Pressure Sensor / Switch should only be installed using the O-ring officially approved for R-134a refrigerant and use suitable refrigerant oil for your HVAC compressor. Coat a new rubber O-ring seal 4 in clean refrigerant oil and insert it onto the discharge line fitting 3. After that, attach and tighten the pressure switch 2 from the HVAC kit to the discharge line fitting. Later, attach wire harness connector 1 to the HVAC pressure switch and lastly, reattach the negative battery cable.

OEM 2008 Dodge Durango HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 HVAC Pressure Switches found

View related parts
2008 Dodge Durango Check Valve Part Number: 4882331
$33.52 MSRP: $49.35
You Save: $15.83 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - A/C Line; Valve A/C Discharge Line Check; Valve Core A/C Line
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 0.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882331
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SE, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2008 Dodge Durango Pressure Switch Part Number: 5174039AB
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, Express, Heat, Limited, Limited Hybrid, R/T, SE, SLT, SXT | 6 Cyl 3.6 L FLEX, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango HVAC Pressure Switch Parts and Q&A

Q: How to Install an HVAC Pressure Switch on 2008 Dodge Durango?
A: The Refrigerant Pressure Sensor / Switch should only be installed using the O-ring officially approved for R-134a refrigerant and use suitable refrigerant oil for your HVAC compressor. Coat a new rubber O-ring seal 4 in clean refrigerant oil and insert it onto the discharge line fitting 3. After that, attach and tighten the pressure switch 2 from the HVAC kit to the discharge line fitting. Later, attach wire harness connector 1 to the HVAC pressure switch and lastly, reattach the negative battery cable.