How to Service a Blower Motor Resistor on 2008 Dodge Durango?

Begin the service on the blower motor resistor by disconnecting and isolating the battery negative cable, then waiting two minutes to let the air bag system capacitor discharge. Turn off the blower motor for at least five minutes before checking the resistor; it tends to heat up while running. Make sure the resistor is still in place before using the fan or you could cause damage to the vehicle. Take care of connecting and disconnecting the black battery cable first. Remove the two screws that hold the trim cover, found on top of the blower motor resistor just below the driver's side of the gauges and take out the cover. After that, remove the wire harness connector from the blower motor resistor. Remove the two screws holding the blower motor resistor in place and then remove the resistor from the front HVAC housing.

OEM 2008 Dodge Durango Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motor Resistors found

View related parts
2008 Dodge Durango Blower Motor Resistor, Rear Part Number: 5019639AA
$46.35 MSRP: $99.55
You Save: $53.20 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Rear; Resistor; Resistor Blower Motor
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.5 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019639AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2008 Dodge Durango Control Module, Front Part Number: 68317103AA
$119.31 MSRP: $179.00
You Save: $59.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Power; HVAC Blower Motor Control Module; Front Control Module; Blower Motor Regulator; Module; Resistor
- Position: Front
- Replaces: 5143824AA, 5061587AA, 5179985AA, 4596304AC, 4596304AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.2 x 5.0 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68317103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Resistor, Front Part Number: 5061575AA
$21.34 MSRP: $31.60
You Save: $10.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; HVAC Blower Motor Regulator; Resistor Blower Motor; HVAC Blower Motor Resistor; Blower Motor Resistor
- Position: Front
- Replaces: 4885635AC, 5174618AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5061575AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Blower Motor Resistor Parts and Q&A

Q: How to Service a Blower Motor Resistor on 2008 Dodge Durango?
A: Begin the service on the blower motor resistor by disconnecting and isolating the battery negative cable, then waiting two minutes to let the air bag system capacitor discharge. Turn off the blower motor for at least five minutes before checking the resistor; it tends to heat up while running. Make sure the resistor is still in place before using the fan or you could cause damage to the vehicle. Take care of connecting and disconnecting the black battery cable first. Remove the two screws that hold the trim cover, found on top of the blower motor resistor just below the driver's side of the gauges and take out the cover. After that, remove the wire harness connector from the blower motor resistor. Remove the two screws holding the blower motor resistor in place and then remove the resistor from the front HVAC housing.