How to Service a Power Steering Pump on 2008 Dodge Nitro?

To service the power steering pump, you track down what power steering fluid you have, then siphon as much of it out as you can. Second, take out the serpentine drive belt. Remove the power steering high pressure hose and return hose from the pump. Next remove these three bolts holding the pump in place on the engine going through the holes in the pulley. Lastly, take the pump off the vehicle.

OEM 2008 Dodge Nitro Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
2008 Dodge Nitro Power Steering Pump Part Number: 52129328AC
$323.35 MSRP: $475.00
You Save: $151.65 (32%)
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Replaces: 52129328AB, 52129328AD
- Item Weight: 5.90 Pounds
- Item Dimensions: 12.8 x 12.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129328AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Nitro Power Steering Pump Part Number: 52109980AD
Product Specifications
- Other Name: Pump - Power Steering; Pump
- Replaces: 52109980AB, 52109980AC
- Item Weight: 5.40 Pounds
- Item Dimensions: 10.8 x 10.4 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109980AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS

2008 Dodge Nitro Power Steering Pump Parts and Q&A

Q: How to Service a Power Steering Pump on 2008 Dodge Nitro?
A: To service the power steering pump, you track down what power steering fluid you have, then siphon as much of it out as you can. Second, take out the serpentine drive belt. Remove the power steering high pressure hose and return hose from the pump. Next remove these three bolts holding the pump in place on the engine going through the holes in the pulley. Lastly, take the pump off the vehicle.