How to Install a Power Steering Pump on a 3.7L Engine on 2009 Dodge Nitro?

First, join the pump to your 3.7L vehicle using the three bolts, making sure the tension is 28 Nm (21 ft.lbs.). After that, fasten the power steering hoses with a torque of 27 Nm (20 ft.lbs.). Once that's completed, install the serpentine belt. The last step is to top up the power steering fluid and make sure you do not see any leaks.

OEM 2009 Dodge Nitro Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
2009 Dodge Nitro Power Steering Pump Part Number: 52129328AC
$323.35 MSRP: $475.00
You Save: $151.65 (32%)
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering; Pump
- Replaces: 52129328AB, 52129328AD
- Item Weight: 5.90 Pounds
- Item Dimensions: 12.8 x 12.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129328AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 6 Cyl 3.7 L GAS
View related parts
2009 Dodge Nitro Power Steering Pump Part Number: 52109980AD
Product Specifications
- Other Name: Pump - Power Steering; Pump
- Replaces: 52109980AB, 52109980AC
- Item Weight: 5.40 Pounds
- Item Dimensions: 10.8 x 10.4 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109980AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 6 Cyl 4.0 L GAS

2009 Dodge Nitro Power Steering Pump Parts and Q&A

Q: How to Install a Power Steering Pump on a 3.7L Engine on 2009 Dodge Nitro?
A: First, join the pump to your 3.7L vehicle using the three bolts, making sure the tension is 28 Nm (21 ft.lbs.). After that, fasten the power steering hoses with a torque of 27 Nm (20 ft.lbs.). Once that's completed, install the serpentine belt. The last step is to top up the power steering fluid and make sure you do not see any leaks.