Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Nitro Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

  • 2008 Dodge Nitro Water Pump - 4792968AF
    2008 Dodge Nitro Water Pump - 4792968AF
    2008 Dodge Nitro Water Pump Diagram - 4792968AF
    View related parts

    2008 Dodge Nitro Water Pump Part Number: 4792968AF

    $158.33 MSRP: $242.00
    You Save: $83.67 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump
    • Replaces: 4792968AD
    • Item Weight: 3.30 Pounds
    • Item Dimensions: 4.8 x 6.0 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4792968AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Nitro Submodels:
    • Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
  • 2008 Dodge Nitro Water Pump - 53022189AH
    2008 Dodge Nitro Water Pump - 53022189AH
    2008 Dodge Nitro Water Pump - 53022189AH
    2008 Dodge Nitro Water Pump - 53022189AH
    2008 Dodge Nitro Water Pump Diagram - 53022189AH
    View related parts

    2008 Dodge Nitro Water Pump Part Number: 53022189AH

    $179.01 MSRP: $267.00
    You Save: $87.99 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
    • Replaces: 53022189AC, 53022189AD, 53022189AF, 5179734AA, 53021187AA, 53022058AA, 53022189AB, 53022189AA, 53022189AG
    • Item Weight: 5.60 Pounds
    • Item Dimensions: 7.7 x 8.3 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53022189AH
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Nitro Submodels:
    • Heat, SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Dodge Nitro Water Pump Parts and Q&A

  • Q: How to Replace a Water Pump on a 3.7L Engine on 2008 Dodge Nitro?
    A: Prior to putting in the new pump, clean the surfaces where the old pump's gasket sat. After that, replace the gasket, line up the water pump and attach the mounting bolts using torque of 54 Nm (40 ft. lbs.). Make sure there is no contact between the impeller and the housing covering the timing chain. Hook up the radiator lower hose to the water pump and then put the accessory drive belt into place. Once done, fix the upper fan shroud to the uppermost fan blade/viscous fan drive and ensure all the parts can take air through the radiator. Attach the fan shroud-to-radiator screws and measure 25 mm (1.0 inches) spacing between the fan blade tips and the shroud. Put the coolant into the cooling system and then attach the negative battery cable. Make sure the engine starts and you don't notice any leaks while warming it up.

Related 2008 Dodge Nitro Parts

Alternate Year Models

+
2007 Dodge Nitro Water Pump 2009 Dodge Nitro Water Pump