How to Maintain and Fix a Tie Rod End on 2008 Dodge Viper?

Carefully raise the vehicle on a Jackson Stand and support it before removing the front tire and the wheel. Relax the inner-to-outer tie rod end nut by removing it. After that, separate the nut from the outer tie rod. Use caution whenever releasing the tie rod from the knuckle with Puller, Special Tool C-4150A, to keep from causing damage to the tie rod grease seal. Use Puller, Special Tool C-4150A, to take off the outer tie rod from the knuckle and finish by unthreading it from the inner tie rod.

OEM 2008 Dodge Viper Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
2008 Dodge Viper Outer Tie Rod, Rear Part Number: 5290168AC
$45.07 MSRP: $54.00
You Save: $8.93 (17%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod - Outer; Steering Tie Rod End, Front Outer, Outer, Rear Outer; Drag Link Repair Kit
- Position: Rear Outer
- Replaces: 5290168AB, 5290168AA
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.9 x 1.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290168AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Viper Submodels:
- SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS, 8.4L V10

2008 Dodge Viper Tie Rod End Parts and Q&A

Q: How to Maintain and Fix a Tie Rod End on 2008 Dodge Viper?
A: Carefully raise the vehicle on a Jackson Stand and support it before removing the front tire and the wheel. Relax the inner-to-outer tie rod end nut by removing it. After that, separate the nut from the outer tie rod. Use caution whenever releasing the tie rod from the knuckle with Puller, Special Tool C-4150A, to keep from causing damage to the tie rod grease seal. Use Puller, Special Tool C-4150A, to take off the outer tie rod from the knuckle and finish by unthreading it from the inner tie rod.