How to Remove and Replace a Brake Master Cylinder on 2008 Jeep Commander?

It is necessary to use a brake pedal prop rod before you can remove and replace the brake master cylinder. After that, take off the reservoir cap and use a hygienic suction gun to draw out the fluid. Take off the connection between the wireless connector and the brake fluid sensor. After that, remove the fluid reservoir from the master cylinder by simply pulling it straight up. Get rid of the grommets found in the cylinder body. When required, take out the fluid level sensor from the reservoir.

OEM 2008 Jeep Commander Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2008 Jeep Commander Master Cylinder Part Number: 5175732AA
$260.59 MSRP: $386.00
You Save: $125.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.10 Pounds
- Item Dimensions: 9.7 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175732AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder on 2008 Jeep Commander?
A: It is necessary to use a brake pedal prop rod before you can remove and replace the brake master cylinder. After that, take off the reservoir cap and use a hygienic suction gun to draw out the fluid. Take off the connection between the wireless connector and the brake fluid sensor. After that, remove the fluid reservoir from the master cylinder by simply pulling it straight up. Get rid of the grommets found in the cylinder body. When required, take out the fluid level sensor from the reservoir.