How to Remove a Brake Master Cylinder on 2009 Jeep Commander?

Before removing the Brake Master Cylinder, siphon out the master cylinder. Remove the big brake line attached to the master cylinder after you've cut the relay wire, then remove the small brake line connected to the same area. Take the brake fluid level switch 7 off from the master cylinder and remove the 2 master cylinder mounting nuts 8. After that, unbolt the master cylinder.

OEM 2009 Jeep Commander Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2009 Jeep Commander Master Cylinder Part Number: 5175732AA
$260.59 MSRP: $386.00
You Save: $125.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.10 Pounds
- Item Dimensions: 9.7 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175732AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Brake Master Cylinder Parts and Q&A

Q: How to Remove a Brake Master Cylinder on 2009 Jeep Commander?
A: Before removing the Brake Master Cylinder, siphon out the master cylinder. Remove the big brake line attached to the master cylinder after you've cut the relay wire, then remove the small brake line connected to the same area. Take the brake fluid level switch 7 off from the master cylinder and remove the 2 master cylinder mounting nuts 8. After that, unbolt the master cylinder.