How to Maintain and Repair a Brake Fluid Level Sensor on 2008 Jeep Commander?

In order to service the Brake Fluid Level Sensor/ Switch, initially loosen the wire connector. Next, with a small screwdriver, unlock the tabs of the lock on the side of the master cylinder reservoir. Lastly, pull out the sensor out of the connector side off the reservoir.

OEM 2008 Jeep Commander Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Jeep Commander Fluid Level Sensor Part Number: 5013903AA
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Sensor; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5013903AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Brake Fluid Level Sensor Parts and Q&A

Q: How to Maintain and Repair a Brake Fluid Level Sensor on 2008 Jeep Commander?
A: In order to service the Brake Fluid Level Sensor/ Switch, initially loosen the wire connector. Next, with a small screwdriver, unlock the tabs of the lock on the side of the master cylinder reservoir. Lastly, pull out the sensor out of the connector side off the reservoir.