Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
Limited, Overland | 3.7L V6, 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 41 Results
2008 Jeep Commander Door Handle Parts and Q&A
Q: How to Install a Door Handle on the Front Exterior on 2008 Jeep Commander?
A: Before putting in the exterior handle, set the lock cylinder into the handle on the driver side if you took it off when preparing the front door. After that, put the exterior handle in place at the hole on the door's main edge and secure it with the three bolts, tightening them to 7 Nm (60 in. lbs.). Attach the actuator rods to the exterior handle near the front door and put the glass into the door frame next. When appropriate, change the front door latch.