How to Remove a Front Door Window Regulator on 2008 Jeep Commander?

To proceed, take out the watershield first from the door window regulator. After that, put the window switch back in place and fully open the glass to find the clamp screws. Open each window regulator a little and remove the door glass from the clamp, but don't take out the clamp. Then properly tape the glass in place. It's important to unclip the mid-conduit clip and the door harness clip before starting the regulator removal. Loose the screws securing the regulator rails on the inside of the door, drop the rails inside, unhook the wire harness connector from the window motor at the center access hole and take out the regulator.

OEM 2008 Jeep Commander Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2008 Jeep Commander Window Regulator, Front Driver Side Part Number: 55396481AI
$215.62 MSRP: $322.00
You Save: $106.38 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 55396481AG, 55396481AH, 55396481AF
- Item Weight: 5.90 Pounds
- Item Dimensions: 32.8 x 25.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396481AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Window Regulator, Front Passenger Side Part Number: 55396480AI
$227.23 MSRP: $322.00
You Save: $94.77 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 55396480AF, 55396480AG, 55396480AH
- Item Weight: 5.30 Pounds
- Item Dimensions: 25.0 x 24.2 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396480AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Window Regulator, Rear Passenger Side Part Number: 55396482AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Replaces: 55396482AB, 55396482AC, 55396482AD
- Item Weight: 4.50 Pounds
- Item Dimensions: 28.9 x 15.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396482AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Window Regulator, Rear Driver Side Part Number: 55396483AF
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left
- Position: Rear Driver Side
- Replaces: 55396483AB, 55396483AD, 55396483AC
- Item Weight: 4.10 Pounds
- Item Dimensions: 25.3 x 14.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396483AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Window Regulator Parts and Q&A

Q: How to Remove a Front Door Window Regulator on 2008 Jeep Commander?
A: To proceed, take out the watershield first from the door window regulator. After that, put the window switch back in place and fully open the glass to find the clamp screws. Open each window regulator a little and remove the door glass from the clamp, but don't take out the clamp. Then properly tape the glass in place. It's important to unclip the mid-conduit clip and the door harness clip before starting the regulator removal. Loose the screws securing the regulator rails on the inside of the door, drop the rails inside, unhook the wire harness connector from the window motor at the center access hole and take out the regulator.