How to Safely Remove a Brake Master Cylinder on 2008 Jeep Compass?

To remove the brake master cylinder, pump the brake pedal 4-5 times with the engine off in order to remove the vacuum. Disconnect the negative cable to the battery and the wiring harness connected to the brake fluid level switch. Remove brake tubes, clean area and then remove the master cylinder from the booster.

OEM 2008 Jeep Compass Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2008 Jeep Compass Master Cylinder Part Number: 5175093AB
$220.45 MSRP: $307.00
You Save: $86.55 (29%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder; Clutch Master Cylinder; Master Cylinder Brake
- Replaces: 5175093AA
- Item Weight: 1.90 Pounds
- Item Dimensions: 10.1 x 6.0 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175093AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Jeep Compass Master Cylinder Part Number: 5175704AB
$106.96 MSRP: $158.00
You Save: $51.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake; Brake Master Cylinder
- Replaces: 5175704AA
- Item Weight: 1.80 Pounds
- Item Dimensions: 9.7 x 6.0 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175704AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Compass Submodels:
- Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Jeep Compass Brake Master Cylinder Parts and Q&A

Q: How to Safely Remove a Brake Master Cylinder on 2008 Jeep Compass?
A: To remove the brake master cylinder, pump the brake pedal 4-5 times with the engine off in order to remove the vacuum. Disconnect the negative cable to the battery and the wiring harness connected to the brake fluid level switch. Remove brake tubes, clean area and then remove the master cylinder from the booster.