How to Install the A/C Switch for Temperature Control on 2008 Jeep Liberty?

As part of the installation, the A/C-heater control needs to be attached to the instrument panel center bezel using four screws. Install the wire harnesses, bezel and reconnect the negative battery cable. A calibration will be automatically set on ignition. In case of the use of a scan tool previously, then use a manual activation of a scan tool.

OEM 2008 Jeep Liberty A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2008 Jeep Liberty Heater Control Part Number: 55111955AC
Product Specifications
- Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit; Control A/C And Heater
- Replaces: 55111816AC, 55111816AF, 55111816AE, 55111955AB, 55111816AD, 55111816AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 11.1 x 4.8 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111955AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Dash Control Unit Part Number: 55111935AB
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module; Control A/C And Heater
- Replaces: 55111935AA, 55111829AC, 55111829AD, 55111829AF, 55111829AE, 55111829AB, 55111829AA
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.1 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111935AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty A/C Switch Parts and Q&A

Q: How to Install the A/C Switch for Temperature Control on 2008 Jeep Liberty?
A: As part of the installation, the A/C-heater control needs to be attached to the instrument panel center bezel using four screws. Install the wire harnesses, bezel and reconnect the negative battery cable. A calibration will be automatically set on ignition. In case of the use of a scan tool previously, then use a manual activation of a scan tool.