How to Properly Install a Front Crankshaft Seal on 2008 Jeep Liberty?

Cleansing the damper bore and crankshaft nose prevents harm to the engine, the damper and the Special Tool 8512, so do this before adding the new seal. Use the Seal Installer 8348 and Damper Installer 8512 to put the crankshaft front seal in place. Now you should place and attach the vibration damper, then the radiator cooling fan and shroud. After you've finished with the lower hose, install the upper one, followed by the A/C compressor, making sure to tighten the fasteners to 54 Nm or 40 ft. lbs. After that, put the accessory drive belt in place, top up the coolant and finish by connecting the negative cable to the battery.

OEM 2008 Jeep Liberty Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2008 Jeep Liberty Rear Main Seal Part Number: 53020788AB
$32.63 MSRP: $48.35
You Save: $15.72 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Oil Seal, Front Part Number: 53021313AA
$10.49 MSRP: $15.00
You Save: $4.51 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2008 Jeep Liberty Crankshaft Seal Parts and Q&A

Q: How to Properly Install a Front Crankshaft Seal on 2008 Jeep Liberty?
A: Cleansing the damper bore and crankshaft nose prevents harm to the engine, the damper and the Special Tool 8512, so do this before adding the new seal. Use the Seal Installer 8348 and Damper Installer 8512 to put the crankshaft front seal in place. Now you should place and attach the vibration damper, then the radiator cooling fan and shroud. After you've finished with the lower hose, install the upper one, followed by the A/C compressor, making sure to tighten the fasteners to 54 Nm or 40 ft. lbs. After that, put the accessory drive belt in place, top up the coolant and finish by connecting the negative cable to the battery.