How to Remove and Service a Front Crankshaft Seal on 2007 Jeep Liberty?

The first step is to remove the accessory drive belt and take the negative cable off the battery to service and repair the front crankshaft seal. Next, take the fasteners holding the A/C compressor in place and keep them out of the way, then drain the cooling system and take off the upper radiator hose. Disconnect the power cable for the fan that's inside the shroud and next remove the fasteners that join the shroud to the radiator. After you finish, remove the radiator cooling fan and its shroud and then remove the crankshaft damper bolt. To completely remove the damper, use 8513 Insert and 1026 Three Jaw Puller and for the crankshaft seal front, use 8511 Special Tool.

OEM 2007 Jeep Liberty Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2007 Jeep Liberty Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Liberty Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS

2007 Jeep Liberty Crankshaft Seal Parts and Q&A

Q: How to Remove and Service a Front Crankshaft Seal on 2007 Jeep Liberty?
A: The first step is to remove the accessory drive belt and take the negative cable off the battery to service and repair the front crankshaft seal. Next, take the fasteners holding the A/C compressor in place and keep them out of the way, then drain the cooling system and take off the upper radiator hose. Disconnect the power cable for the fan that's inside the shroud and next remove the fasteners that join the shroud to the radiator. After you finish, remove the radiator cooling fan and its shroud and then remove the crankshaft damper bolt. To completely remove the damper, use 8513 Insert and 1026 Three Jaw Puller and for the crankshaft seal front, use 8511 Special Tool.